No Products in the Cart
Please note that the LED Lights can only be activated in the PHOTON function. Press ON/OFF button to turn on the device, then press MODE button until PHOTON function is flashing on the screen and the press SHIFT button and the RED Light will come on, press again SHIFT Button and the BLUE function and if you press SHIFT again and it will switch to GREEN Light.
Please note that the Massage can be activated from the MASSAGE function. Press ON/OFF button to turn on the device, then press MODE button until the MASSAGE function is flashing on the screen and the press SHIFT button and then press the CFM button and the device will start operating.
The Dermisonic device can be used 1-2 per week for 15 minutes per session in total, for minimum 6-8 treatment.
- With the Dermisonic device you need to use 3 main cosmetic products: an exfoliating gel for step 1, a facial mask for step 2 and a moisturizer for step 3.
- On how to perform a treatment with Dermisonic, please check the DERMISONIC TREATMENT GUIDE.
The device should be charge for 2 hours only, please avoid to leave it on charge longer to avoid any damage to the battery .
In the case of teeth implants, please avoid using the Galvanic ( ION- and ION+) on that specific area; the rest of the functions ( Sonic, Massage and Photon are safe to use)
Yes, you can use multiple functions in the same time when performing the treatment.
- ION+ is recommended to be used in step 1 when cleansing the face, it draws out impurities, toxins and dead cells.
- ION- is recommended to be used in step 2 and 3, it helps the skin cream nutrients to penetrate deeper into the skin layers.
A list of contraindications is stipulated on the back of the manual, please read the Contraindications list before using the device, if you have any further enquiries, please contact our Customer Support for assistance at: +44 (0) 207 998 5708.
- The device works by smart touch sensor, it doesn’t have an ON/OFF button;
- the device is designed to work when comes in contact with the skin, if the device is not conducting please check if the battery is placed correctly, if that is not the case the device might not suitable for your skin.
- The Dermieye device can be used daily, morning and/or evening with your favorite eye cream/serum.
- Apply the cream/serum and massage for 1-2 minutes around each eye, avoiding the eye socket.
Start by massaging from the inner corner of the eye towards the exterior.
Yes, it can, by massaging the eyebrow line.
The Dermieye device has no contraindications
The Dermineck device can be used 2-3 times week, 10-15 minutes per session.
Press the ON/OFF button and since the Dermineck device works by smart sensor touch, it will start to operate when comes in contact with the skin.
You can use it with your favorite anti-aging moisturizer.
- To turn on the device press and hold the On/OFF button for 10-20 seconds or until the device turns on.
- To change the color click once the ON/OFF button;
- Lift the plastic cap on the bottom of the device and insert the charging port
- Please note that the Dermineck device comes with a USB charging cable
When the battery is running low the RED light will start flashing, when placed on charge the BLUE light will start flashing; the device takes up to 3 hours to fully charge and the BLUE light stay on, indicates the battery has reached its saturation.
Apply your moisturiser and start massaging from the base of the neck up to the chin, repeat same movement on the same area for about 3-5 times, before moving to the other side.